Volume of Cylinder

Two circles joined by a curved wall.

Measurements

cm
cm
Unit
Decimal places
Value of π

Live figure

r = 4 cmh = 9 cm

Drag the sliders. The figure redraws to scale.

Results

Volume452.39cm³
V = πr²h
π × 4² × 9 = 452.39
  • Total surface326.73cm²
    2π × 4 × (4 + 9) = 326.73
  • Curved surface226.19cm²
    2π × 4 × 9 = 226.19
  • Base area50.265cm²
    π × 4² = 50.265

Formulas

How each value is found

Volume
V = πr²h
Total surface
S = 2πr(r + h)
Curved surface
C = 2πrh
Base area
B = πr²

About the cylinder

A cylinder is a circle extended through a height. Unroll its curved wall and you get a rectangle, which is where the 2πrh comes from.

Where you’ll use it

  • Cans, pipes and tanks
  • Engine displacement
  • Columns and rollers

Volume of a cylinder: formula, steps and examples

Volume of a cylinder calculator

This free cylinder volume calculator finds the volume of a cylinder, along with its surface area, instantly. Enter radius and height, choose your unit and the cylinder calculator shows the volume of a cylinder with the formula, the substituted numbers and a live diagram drawn to scale, so you can see exactly how the answer was worked out.

Students use this online cylinder volume calculator to check homework and revision, while builders, designers and DIY fans use it to estimate materials without doing the sum by hand. It works in cm, metres, inches and feet, needs no sign-up, and is fast on phones, tablets and laptops.

What is a cylinder?

A cylinder is a circle extended through a height. Unroll its curved wall and you get a rectangle, which is where the 2πrh comes from.

Understanding the shape comes first, because the volume of a cylinder depends on which measurements define it. For this shape you need radius and height. Once those are known, every other measurement, including the total surface, curved surface and base area, can be calculated from them.

Volume of a cylinder formula

The volume of a cylinder formula is V = πr²h. Remember this cylinder volume formula and you can solve any cylinder volume problem. Volume measures how much three-dimensional space the solid occupies, which is the amount it can hold, so the answer is always written in cubic units (cm³, m³, in³, ft³).

Related cylinder formulas you will often need alongside it: total surface S = 2πr(r + h); curved surface C = 2πrh; base area B = πr². All of them are calculated for you above and listed on the formula sheet.

How to find the volume of a cylinder, step by step

If you are wondering how to find the volume of a cylinder, or how to calculate the volume of a cylinder, follow four steps. 1. Measure radius and height, using the same unit for every value. 2. Write the formula, V = πr²h. 3. Substitute your measurements into the formula. 4. Calculate, and write the answer in cubic units (cm³, m³, in³, ft³).

Worked example: with the default values in the calculator, volume is found like this: π × 4² × 9 = 452.39. Change any slider or number above and the working rewrites itself, which makes it easy to practise with your own examples and check your answers.

Where the cylinder is used in real life

Knowing the volume of a cylinder is useful far beyond the classroom. Typical uses include cans, pipes and tanks, engine displacement and columns and rollers. Builders, designers, engineers, gardeners and craftspeople all rely on quick volume calculations to estimate materials, cost and capacity before they start work.

Units and conversions for cylinder volume

To find the volume of a cylinder in cm³, litres or cubic meters, measure every side in that unit first. Because volume is measured in cubic units (cm³, m³, in³, ft³), converting units needs care. One cubic metre is 1,000 litres or 1,000,000 cubic centimetres, and one litre equals 1,000 cm³. Convert the lengths first, then calculate, or calculate first and convert the final volume with the squared or cubed factor. The calculator handles the unit label for you so the answer always matches what you entered.

Tips for learning the cylinder volume formula

The quickest way to remember V = πr²h is to understand where it comes from, not just memorise it. Sketch the cylinder, label radius and height, and ask what each measurement contributes to the volume. Then practise with three or four different sets of numbers until the steps feel automatic.

Use the sliders above to see how the volume responds when a single measurement changes. Doubling every length multiplies the volume by eight, because volume depends on three lengths multiplied together. A length that is squared in the formula, such as a radius, quadruples the volume when it is doubled on its own, while one that appears only once, such as a height, simply doubles it.

Related searches about the cylinder

People who look for the volume of a cylinder often search for volume of a cylinder in litres, surface area of a cylinder, cylinder volume formula, cylinder surface area and cylinder formula too. This page answers all of them: the cylinder calculator above gives the numbers, the formula section explains the method, and the worked example shows how the cylinder volume formula is used with real values. Use it for cylinder math problems, revision questions and quick checks on site.

Explore more volume calculators

After the cylinder, try the cube, cuboid, cone and sphere calculators, or open the full geometry formula sheet with all 20 shapes. Each page has the same live diagram and step-by-step working, so you can compare formulas and learn how volume and surface area relate across shapes.

Frequently asked questions

What is the formula for the volume of a cylinder?
The volume of a cylinder is V = πr²h. Substitute your measurements and write the answer in cubic units (cm³, m³, in³, ft³).
How do I calculate the volume of a cylinder?
Measure radius and height in the same unit, put them into V = πr²h, then calculate. This page does it automatically and shows every step.
What units is the volume of a cylinder measured in?
Volume is measured in cubic units (cm³, m³, in³, ft³). If your sides are in metres, the answer is in cubic metres (m³).
Can I find the cylinder surface area here too?
Yes. The calculator also gives the total surface, curved surface and base area with the formula and working for each.
What is the cylinder formula?
The main cylinder formula is V = πr²h. Other cylinder formulas: total surface S = 2πr(r + h); curved surface C = 2πrh.
How do I find the volume of a cylinder in cm3, litres or cubic meters?
Enter radius and height in cm, m, inches or feet. The calculator gives the cylinder volume in cm³, m³, in³ or ft³ (1,000 cm³ = 1 litre).
Is this cylinder volume calculator free?
Yes, it is completely free, needs no account, and works on any device.