Volume of Cone

A circle rising to a single point.

Measurements

cm
cm
Unit
Decimal places
Value of π

Live figure

h = 9 cmr = 5 cm

Drag the sliders. The figure redraws to scale.

Results

Volume235.62cm³
V = ⅓πr²h
⅓ × π × 5² × 9 = 235.62
  • Total surface240.26cm²
    π × 5 × (5 + 10.296) = 240.26
  • Curved surface161.72cm²
    π × 5 × 10.296 = 161.72
  • Slant height10.296cm
    √(25 + 81) = 10.296
  • Apex angle58.109°
    2 × tan⁻¹(5 ÷ 9) = 58.109°

Formulas

How each value is found

Volume
V = ⅓πr²h
Total surface
S = πr(r + l)
Curved surface
C = πrl
Slant height
l = √(r² + h²)
Apex angle
2 × tan⁻¹(r ÷ h)

About the cone

A cone holds exactly one third of the cylinder that would enclose it. The slant height runs along its side from the rim to the tip.

Where you’ll use it

  • Funnels and traffic cones
  • Ice-cream cones
  • Piles of sand or grain

Volume of a cone: formula, steps and examples

Volume of a cone calculator

This free cone volume calculator finds the volume of a cone, along with its surface area, instantly. Enter radius and height, choose your unit and the cone calculator shows the volume of a cone with the formula, the substituted numbers and a live diagram drawn to scale, so you can see exactly how the answer was worked out.

Students use this online cone volume calculator to check homework and revision, while builders, designers and DIY fans use it to estimate materials without doing the sum by hand. It works in cm, metres, inches and feet, needs no sign-up, and is fast on phones, tablets and laptops.

What is a cone?

A cone holds exactly one third of the cylinder that would enclose it. The slant height runs along its side from the rim to the tip.

Understanding the shape comes first, because the volume of a cone depends on which measurements define it. For this shape you need radius and height. Once those are known, every other measurement, including the total surface, curved surface and slant height, can be calculated from them.

Volume of a cone formula

The volume of a cone formula is V = ⅓πr²h. Remember this cone volume formula and you can solve any cone volume problem. Volume measures how much three-dimensional space the solid occupies, which is the amount it can hold, so the answer is always written in cubic units (cm³, m³, in³, ft³).

Related cone formulas you will often need alongside it: total surface S = πr(r + l); curved surface C = πrl; slant height l = √(r² + h²). All of them are calculated for you above and listed on the formula sheet.

How to find the volume of a cone, step by step

If you are wondering how to find the volume of a cone, or how to calculate the volume of a cone, follow four steps. 1. Measure radius and height, using the same unit for every value. 2. Write the formula, V = ⅓πr²h. 3. Substitute your measurements into the formula. 4. Calculate, and write the answer in cubic units (cm³, m³, in³, ft³).

Worked example: with the default values in the calculator, volume is found like this: ⅓ × π × 5² × 9 = 235.62. Change any slider or number above and the working rewrites itself, which makes it easy to practise with your own examples and check your answers.

Where the cone is used in real life

Knowing the volume of a cone is useful far beyond the classroom. Typical uses include funnels and traffic cones, ice-cream cones and piles of sand or grain. Builders, designers, engineers, gardeners and craftspeople all rely on quick volume calculations to estimate materials, cost and capacity before they start work.

Units and conversions for cone volume

To find the volume of a cone in cm³, litres or cubic meters, measure every side in that unit first. Because volume is measured in cubic units (cm³, m³, in³, ft³), converting units needs care. One cubic metre is 1,000 litres or 1,000,000 cubic centimetres, and one litre equals 1,000 cm³. Convert the lengths first, then calculate, or calculate first and convert the final volume with the squared or cubed factor. The calculator handles the unit label for you so the answer always matches what you entered.

Tips for learning the cone volume formula

The quickest way to remember V = ⅓πr²h is to understand where it comes from, not just memorise it. Sketch the cone, label radius and height, and ask what each measurement contributes to the volume. Then practise with three or four different sets of numbers until the steps feel automatic.

Use the sliders above to see how the volume responds when a single measurement changes. Doubling every length multiplies the volume by eight, because volume depends on three lengths multiplied together. A length that is squared in the formula, such as a radius, quadruples the volume when it is doubled on its own, while one that appears only once, such as a height, simply doubles it.

Related searches about the cone

People who look for the volume of a cone often search for volume of a cone formula, slant height of a cone, surface area of a cone, cone surface area and cone formula too. This page answers all of them: the cone calculator above gives the numbers, the formula section explains the method, and the worked example shows how the cone volume formula is used with real values. Use it for cone math problems, revision questions and quick checks on site.

Explore more volume calculators

After the cone, try the cube, cuboid, cylinder and sphere calculators, or open the full geometry formula sheet with all 20 shapes. Each page has the same live diagram and step-by-step working, so you can compare formulas and learn how volume and surface area relate across shapes.

Frequently asked questions

What is the formula for the volume of a cone?
The volume of a cone is V = ⅓πr²h. Substitute your measurements and write the answer in cubic units (cm³, m³, in³, ft³).
How do I calculate the volume of a cone?
Measure radius and height in the same unit, put them into V = ⅓πr²h, then calculate. This page does it automatically and shows every step.
What units is the volume of a cone measured in?
Volume is measured in cubic units (cm³, m³, in³, ft³). If your sides are in metres, the answer is in cubic metres (m³).
Can I find the cone surface area here too?
Yes. The calculator also gives the total surface, curved surface and slant height with the formula and working for each.
What is the cone formula?
The main cone formula is V = ⅓πr²h. Other cone formulas: total surface S = πr(r + l); curved surface C = πrl.
How do I find the volume of a cone in cm3, litres or cubic meters?
Enter radius and height in cm, m, inches or feet. The calculator gives the cone volume in cm³, m³, in³ or ft³ (1,000 cm³ = 1 litre).
Is this cone volume calculator free?
Yes, it is completely free, needs no account, and works on any device.